Circular cold saws hss Bahco
Cirkulārā zāģa ripas Preces kods: 3815-370-3.0-50-4-10C
456.85 €
(456.85 € / Nos)
Uz pasūtījumu
Piegāde līdz 30 dienām pēc apmaksas. Šo preci pasūtām no ražotāja speciāli Jums.
Kā tas notiek?
• High-speed steel (HSS) circular saw blades for cutting steel, iron, metal and light metal applications
• To be used in both manual and automated machines
• Hole pattern:
• 4 / 15 - 80
• Example: 4/15-80 = 4 pin holes Ø15mm positioned within a circle of 80mm
• Tooth shape C is used for solid sections and thick pipes, every second tooth has two chamfers on each side while the others are without chamfer
• Example: -08C = Tooth pitch 8mm with C tooth shape
• Packed in an easy-to-use cardboard pack also used as tooth protection
• High-Speed Steel Circular saw with Steam-treated surface
• Flexibility for usage in both manual and automated machines
• Tooth Shape BW is mainly for cutting tubes and profiles, the tooth is alternately bevelled at 45° and breaks the chip in two which guarantees good chip clearance
• Tooth shape C is used for solid sections and thick pipes, every second tooth has two chamfers on each side while the others are without chamfer
• A useful rule of thumb is that at least three teeth should be engaged at any time
• To be used in both manual and automated machines
• Hole pattern:
• 4 / 15 - 80
• Example: 4/15-80 = 4 pin holes Ø15mm positioned within a circle of 80mm
• Tooth shape C is used for solid sections and thick pipes, every second tooth has two chamfers on each side while the others are without chamfer
• Example: -08C = Tooth pitch 8mm with C tooth shape
• Packed in an easy-to-use cardboard pack also used as tooth protection
• High-Speed Steel Circular saw with Steam-treated surface
• Flexibility for usage in both manual and automated machines
• Tooth Shape BW is mainly for cutting tubes and profiles, the tooth is alternately bevelled at 45° and breaks the chip in two which guarantees good chip clearance
• Tooth shape C is used for solid sections and thick pipes, every second tooth has two chamfers on each side while the others are without chamfer
• A useful rule of thumb is that at least three teeth should be engaged at any time